222/222R Two Channel

Features & Benefits

• All adjustments and controls are separate and independent for each channel, with the exception of the reset input.
• An on-board jumper for each channel is provided to assure a minimum presence output of 100 milliseconds.
• Two independent LED indicators:
vCALL
vFAULT
• The Winky-Blink™ loop monitor remembers
and indicates intermittent and failed loops.
• Transformer isolation for loops
• High intensity LED DETECT indicators
• Front panel width is 1.12" (28 mm)
• Loops are sequentially scanned, which helps eliminate crosstalk.
• If intermittent or failed loops self-heal, the detector will resume normal operation without requiring a manual reset.
• Self-tuning and complete environmental tracking
• Two selectable modes per channel:
vPulse
vPresence
• Failsecure or failsafe available
• Four loop frequencies per channel
• Eight levels of sensitivity per channel, over an extended range, cover every situation.
• Switching sensitivity level, loop frequency, and operating modes is accomplished by DIP switches

Return to Detection Products